Layered glass tunnels for lobbies & brand moments
Infinity mirrors
Infinity mirrors rely on precise glass spacing, beam angles, and diffusion to feel endless rather than glitchy. Luckyssign prototypes electronics depth and mirror coatings before committing to full-scale fabrication.
- Glass stack
- Half-mirror · rear mirror
- LED
- PWM-safe · zoned colour
- Mounting
- Flush · portal · ceiling
- Lead time
- 20–30 days typical
Overview
We engineer mounting so installers can level stacks without trapping dust, and so service access does not destroy the illusion edge. Thermal paths for LEDs are documented for continuous-run installs.
Integration with surrounding stone, metal reveals, or upholstered portals is modeled early — awkward overlaps are resolved in CAD instead of on site.
Provide ceiling heights, viewing angles, and desired color choreography — we advise glass counts and control zones accordingly.
What you get
- Layered glass stacks
- PWM-safe LED layouts
- Diffusion & beam control
- Leveling & concealed fasteners
- Thermal notes for long runs
- Dimming & scene presets
- White-glove install coordination
Have drawings ready? Send them to our quote desk →
Optics that look endless — not glitchy
Infinity mirrors fail when glass spacing, half-mirror transmission, and LED pitch fight each other. Too much spacing and the rings look sparse; too little and you get moiré, hotspots, and a cheap carnival effect. We prototype coatings, cavity depth, and beam angle on a bench panel before full-scale metal is cut.
Front glass is typically a partial-mirror acrylic or glass laminate; the rear is a full mirror. LED rings sit in a controlled reveal so each reflection stays sharp. Sample panels are powered and photographed at the intended viewing distance so marketing and the architect agree before a lobby-scale run ships.
- Half-mirror transmission matched to cavity depth and LED brightness
- LED pitch and beam angle tuned to kill hotspots and moiré
- Bench prototypes before full-scale fabrication
- Powered sample photos at intended viewing distance
Frames and reveals that protect the illusion edge
The tunnel dies the moment a fastener, cable, or dusty gap appears at the perimeter. Frames are extruded or fabricated aluminum with powder coat or anodised finishes, detailed so millwork, stone, or upholstered portals absorb the cabinet without trapping a bright edge.
Leveling planes and concealed fasteners are designed for installers who will never see the piece again after handover. We note substrate assumptions — stud wall, concrete, or millwork niche — so the GC is not inventing structure on the lift.
- Extruded or fabricated aluminum frames with finish options
- Concealed fasteners and continuous illusion-edge reveals
- Millwork, stone, and portal integration drawn early
- Substrate and leveling notes for the GC
Drivers, dimming, and thermal paths for continuous run
Lobby and spa features often run twelve to eighteen hours a day. Remote Class 2 drivers, PWM-safe LED layouts, and documented thermal paths keep colour stable and avoid early module failure behind sealed glass. Control zones support scene presets, warm/cool shifts, or brand colour without flicker on camera.
UL-listed or CE-marked components are selected for the destination market. Drawings show junction-distance limits, disconnect locations, and service access that does not require dismantling the glass stack to swap a driver.
- Remote Class 2 drivers with documented loads and spare capacity
- PWM-safe layouts for dimmers, DMX, or scene controllers
- Thermal notes for sealed continuous-run cabinets
- Service access that preserves the glass stack
Fabrication that keeps every ring aligned
Glass layers, spacers, and LED rings are assembled in a fixed sequence under clean conditions — dust between mirrors becomes a permanent bright speck. Colour temperature and brightness are matched across zones; logo cut-outs are registered so the brand repeats on centre, not drifting left as depth increases.
Completed panels burn in for 24 to 48 hours. Marginal LEDs, coating defects, and spacer misalignment show up in our building — where fixing them costs a morning instead of a site visit after millwork is closed.
- Clean-room-minded glass and spacer assembly
- Logo and geometry registration through the stack
- 24–48 hour powered burn-in with zone comparison
- Reference panel retained for reorders and expansions
Packed and installed without killing the optics
Glass and frames ship in protective crates with edge guards and desiccant where ocean freight demands it. Hardware kits, leveling notes, and wiring diagrams are labelled so the installer levels the stack before seating the final glass — dust trapped mid-install is the most common field failure we see from third-party crates.
Send ceiling heights, viewing angles, cavity depth, colour intent, and destination country. We come back with glass counts, control zones, and a lead-time band — usually within one working day.
- Edge-protected export crates for glass stacks
- Labelled hardware, leveling, and wiring packs
- Install sequence notes to keep dust out of the cavity
- Photographed packing states for brand compliance portals
Configurations
Choose the tunnel format first
Wall panels, logo tunnels, and ceiling corridors share the same half-mirror optics — but they differ in depth budget, viewing angle, and how millwork absorbs the frame without killing the illusion edge.
Wall feature panels
Flush or lightly projecting cabinets with controlled glass spacing and perimeter LED rings. Built for reception walls and brand portals where guests pause and the tunnel must read clean from three to eight metres.
Best for hotel lobbies, spa receptions, corporate atriums, and flagship brand walls
Logo & brand tunnels
Custom cut-outs, acrylic logos, or geometric frames seated between the glass layers so the mark repeats into depth. Optics and LED pitch are tuned so the brand remains legible instead of dissolving into noise.
Best for flagship retail, showrooms, and photo-ready brand moments
Ceiling & corridor tunnels
Overhead or end-of-corridor stacks sized for longer sightlines. Deeper cavities, heavier glass, and zoned drivers keep the vanishing point stable when guests approach from an angle rather than straight on.
Best for hospitality corridors, elevator banks, and experiential walk-throughs
Specifications
Build specifications we commit to
Every line below is confirmed on your shop drawings before fabrication starts, so approvals, inspections, and installs run off the same numbers.
- Front glass
- Half-mirror acrylic or glass laminate
- Rear glass
- Full mirror, sealed cavity
- Cavity depth
- 40–120 mm typical (deeper tunnels on request)
- LED
- SMD rings / strips, PWM-safe, batch-matched
- Colour
- 2700K–6500K, RGB/RGBW, or brand colour
- Control
- Dimmer, scene presets, DMX / 0–10V on request
- Drivers
- Remote Class 2, UL-listed or CE-marked
- Frame
- Aluminum, powder coat or anodised
- Mounting
- Flush wall, portal niche, ceiling / corridor
- Environment
- Indoor conditioned spaces (IP rated options on request)
- Artwork input
- AI / DXF for logos; mood refs for colour scenes
- Lead time
- 20–30 days after optics and finish sign-off
Installed results
Installed infinity mirror features
Lobby and brand-wall results from recent programs — the same glass stacks, LED rings, and install packs described above.
From drawing to crate
How your order moves through the factory
Drawings & optics advice
Send sizes, viewing angles, cavity depth, colour intent, and destination market. You get glass-count options, control zones, and a lead-time band — usually within a working day.
Shop drawings & sample sign-off
Dimensioned drawings, section details, mount method, and electrical intent go out for approval. A powered bench sample confirms the tunnel depth and colour before the full run.
Fabricate & burn in
Frame, glass stack, LED rings, and controls assemble under clean conditions, then 24–48 hours of powered aging with zone comparison.
Crate, ship & support install
Edge-protected crates, hardware kits, leveling notes, and wiring diagrams — plus remote support for your installer and millwork GC.
Where it ships
Programs we build this for
Hotel & spa lobbies
Flush feature panels sized for reception walls and wellness portals where guests pause and photograph.
Flagship retail & showrooms
Logo tunnels and brand geometry that repeat into depth for campaign and social moments.
Corporate atriums & receptions
Controlled colour temperatures that match architectural lighting packages without flicker on camera.
Nightlife & experiential corridors
Ceiling and walk-through tunnels with zoned RGB scenes for clubs, bars, and event spaces.
Franchise & multi-site rollouts
One approved optics family repeated across sites so depth and colour stay consistent city to city.
Sign trade & wholesale partners
Trade pricing, white-label crates, and drawing packs your team can present under your own brand.
Buyer questions
What buyers ask before the first order
How deep does an infinity mirror need to be?
Most wall features work in a 40–120 mm cavity once half-mirror transmission and LED brightness are matched. Deeper tunnels suit corridor and ceiling formats or strong logo repeats. We advise glass counts and depth against your viewing distance — not a one-size cavity.
What is the minimum order for custom infinity mirrors?
There is no unit minimum — we quote single lobby features as readily as multi-site brand tunnels. Price efficiency comes from shared frame tooling and LED batches, so a one-off reception panel is quoted on its own merits and a rollout is quoted with repeat pricing.
How long does production take?
Typical production is 20 to 30 days after optics, finish, and control intent are signed off, plus transit. Custom logos, RGB/DMX control, and oversized glass can add a few days; we give you a firm band with the quote.
How do you keep the tunnel from looking glitchy or cheap?
We prototype half-mirror coatings, cavity depth, and LED pitch on a bench panel, then power and photograph at the intended viewing distance. That kills moiré, hotspots, and uneven rings before full-scale fabrication — the most common failure mode of commodity infinity mirrors.
Can facilities service drivers without dismantling the glass?
Yes when we design service access up front — remote Class 2 drivers and labeled low-voltage runs live behind a removable backplate or adjacent millwork cavity. Tell us continuous-run hours and control needs at enquiry stage so the stack stays sealed.
Are your infinity mirrors UL listed or CE compliant?
We supply UL-listed or CE-marked drivers and LED components selected for the destination market, and we state clearly which listing applies to components versus the finished assembly. Landlord or AHJ constraints should be named early so the power path is engineered in.
How do you ship glass stacks internationally?
Panels ship in edge-protected export crates with glass and frames guarded, desiccant on long ocean routes, and hardware kits labelled separately. Manifests and packing photos are available for brand or retailer compliance portals.
Can you work as an OEM supplier for our design or sign company?
Yes — a significant share of our volume is trade and wholesale work. We can ship white-labelled crates, supply drawing packs without our branding, and hold approved optics families so your reorders stay consistent.
Related specifications & guides
Planning notes that support this product — comparison guides and compliance primers for specifiers and buyers.
- How to Prepare Your Vector Files (AI/EPS/DXF) for Custom Sign ManufacturingRead guide →
- Engineering glow for bars and spas: dimming, glare, and service access for neon-style featuresRead guide →
- Behind the Scenes: How a Custom LED Sign Gets Made (From Vector Design to Finished Product)Read guide →
- Architectural Signage: Meeting the High Standards of Designers and ArchitectsRead guide →
- How We Pack and Ship Oversized LED Signs Internationally with Zero DamageRead guide →
Ready for shop drawings & quantities?
Tell us destination country, illumination class, and install substrate — we respond with material options, lead-time bands, and export packing assumptions for your custom signage program.